Traditional flooring for projects on a scale of 20+ mm The stones on this cylinder are 6 x 3 mm The diameter of the cylinder is 37 mm The height of the cylinder is 146 mm
Hard foam Structure Cylinder series
These cylinders are designed for texturing hard foam. The cylinders are made out of a hard shock proof plastic. The structure in each cylinder is deep and the lines are sharp in order to get a perfect result even with less pressure.
To get a good imprint a round stick is used. By rolling the cylinder using the stick you apply only pressure where pressure is needed; The area where the cylinder touches the foam.
Using two discs on either side of the cylinder help you to align the cylinder while rolling it over the foam.